Twicea electronic parts stores,electronic components,electronic parts,electronics parts supply Twicea electronic parts stores,electronic components,electronic parts,electronics parts supply
Factory Lead TimeMaterialPart StatusMoisture Sensitivity Level (MSL)TypeDiameter - Bit
Bantam Tools BN1010
Mfr.
BN1010
Twicea
117-722-BN1010 		Bantam Tools
END MILL CARBIDE ASSORTED
    Min.:1
    Mult.:1
    		 2 Weeks Carbide Active Not Applicable End Mill Assorted
    BN1010
    BN1010

    117-722-BN1010 Bantam Tools
    :
    : -
    : -
    1 : -
    Bantam Tools TL1017-10
    Mfr.
    TL1017-10
    Twicea
    117-722-TL1017-10     		Bantam Tools
    END MILL 0.003" 10PK
      Min.:1
      Mult.:1
      		 2 Weeks - Active Not Applicable End Mill, Engraving -
      TL1017-10
      TL1017-10

      117-722-TL1017-10 Bantam Tools
      :
      : -
      : -
      1 : -
      Bantam Tools BN1004
      Mfr.
      BN1004
      Twicea
      117-722-BN1004       		Bantam Tools
      END MILL MODELING BIT BUNDLE
        Min.:1
        Mult.:1
        		 2 Weeks - Active Not Applicable End Mill -
        BN1004
        BN1004

        117-722-BN1004 Bantam Tools
        :
        : -
        : -
        1 : -
        Bantam Tools TL1008-10
        Mfr.
        TL1008-10
        Twicea
        117-722-TL1008-10         		Bantam Tools
        END MILL PCB ENGRAVD 0.005" 10PK
          Min.:1
          Mult.:1
          		 2 Weeks - Active Not Applicable End Mill, Engraving -
          TL1008-10
          TL1008-10

          117-722-TL1008-10 Bantam Tools
          :
          : -
          : -
          1 : -
          Bantam Tools TL1017
          Mfr.
          TL1017
          Twicea
          117-722-TL1017           		Bantam Tools
          END MILL CARBIDE 0.003"
            Min.:1
            Mult.:1
            		 2 Weeks Carbide Active Not Applicable End Mill, Engraving 0.003 (0.08mm)
            TL1017
            TL1017

            117-722-TL1017 Bantam Tools
            :
            : -
            : -
            1 : -
            Bantam Tools TL1012
            Mfr.
            TL1012
            Twicea
            117-722-TL1012             		Bantam Tools
            END MILL CARBIDE 0.016"
              Min.:1
              Mult.:1
              		 2 Weeks Carbide Active Not Applicable End Mill, Ball 0.016 (0.41mm)
              TL1012
              TL1012

              117-722-TL1012 Bantam Tools
              :
              : -
              : -
              1 : -
              Bantam Tools BN1002
              Mfr.
              BN1002
              Twicea
              117-722-BN1002               		Bantam Tools
              END MILL CARBIDE ASSORTED
                Min.:1
                Mult.:1
                		 2 Weeks Carbide Active Not Applicable End Mill Assorted
                BN1002
                BN1002

                117-722-BN1002 Bantam Tools
                :
                : -
                : -
                1 : -
                Bantam Tools TL1004
                Mfr.
                TL1004
                Twicea
                117-722-TL1004                 		Bantam Tools
                END MILL CARBIDE 0.031"
                  Min.:1
                  Mult.:1
                  		 2 Weeks Carbide Active Not Applicable End Mill, Flat 0.031 (0.79mm)
                  TL1004
                  TL1004

                  117-722-TL1004 Bantam Tools
                  :
                  : -
                  : -
                  1 : -
                  Bantam Tools TL1000-10
                  Mfr.
                  TL1000-10
                  Twicea
                  117-722-TL1000-10                   		Bantam Tools
                  END MILL BALL 1/8" 10PK
                    Min.:1
                    Mult.:1
                    		 2 Weeks - Active Not Applicable End Mill, Ball -
                    TL1000-10
                    TL1000-10

                    117-722-TL1000-10 Bantam Tools
                    :
                    : -
                    : -
                    1 : -
                    Bantam Tools TL1004-10
                    Mfr.
                    TL1004-10
                    Twicea
                    117-722-TL1004-10                     		Bantam Tools
                    END MILL FLAT 1/32" 10PK
                      Min.:1
                      Mult.:1
                      		 2 Weeks - Active Not Applicable End Mill, Flat -
                      TL1004-10
                      TL1004-10

                      117-722-TL1004-10 Bantam Tools
                      :
                      : -
                      : -
                      1 : -
                      Bantam Tools TL1011-10
                      Mfr.
                      TL1011-10
                      Twicea
                      117-722-TL1011-10                       		Bantam Tools
                      END MILL BALL 1/32" 10PK
                        Min.:1
                        Mult.:1
                        		 2 Weeks - Active Not Applicable End Mill, Ball -
                        TL1011-10
                        TL1011-10

                        117-722-TL1011-10 Bantam Tools
                        :
                        : -
                        : -
                        1 : -
                        Bantam Tools TL1002
                        Mfr.
                        TL1002
                        Twicea
                        117-722-TL1002                         		Bantam Tools
                        END MILL CARBIDE 0.125"
                          Min.:1
                          Mult.:1
                          		 2 Weeks Carbide Active Not Applicable End Mill, Flat 0.125 (3.18mm)
                          TL1002
                          TL1002

                          117-722-TL1002 Bantam Tools
                          :
                          : -
                          : -
                          1 : -
                          Bantam Tools TL1003
                          Mfr.
                          TL1003
                          Twicea
                          117-722-TL1003                           		Bantam Tools
                          END MILL CARBIDE 0.063"
                            Min.:1
                            Mult.:1
                            		 2 Weeks Carbide Active Not Applicable End Mill, Flat 0.063 (1.60mm)
                            TL1003
                            TL1003

                            117-722-TL1003 Bantam Tools
                            :
                            : -
                            : -
                            1 : -
                            Bantam Tools TL1005-10
                            Mfr.
                            TL1005-10
                            Twicea
                            117-722-TL1005-10                             		Bantam Tools
                            END MILL FLAT 1/64" 10PK
                              Min.:1
                              Mult.:1
                              		 2 Weeks - Active Not Applicable End Mill, Flat -
                              TL1005-10
                              TL1005-10

                              117-722-TL1005-10 Bantam Tools
                              :
                              : -
                              : -
                              1 : -
                              Bantam Tools TL1001-10
                              Mfr.
                              TL1001-10
                              Twicea
                              117-722-TL1001-10                               		Bantam Tools
                              END MILL BALL 1/16" 10PK
                                Min.:1
                                Mult.:1
                                		 2 Weeks - Active Not Applicable End Mill, Ball -
                                TL1001-10
                                TL1001-10

                                117-722-TL1001-10 Bantam Tools
                                :
                                : -
                                : -
                                1 : -
                                Bantam Tools TL1011
                                Mfr.
                                TL1011
                                Twicea
                                117-722-TL1011                                 		Bantam Tools
                                END MILL CARBIDE 0.031"
                                  Min.:1
                                  Mult.:1
                                  		 2 Weeks Carbide Active Not Applicable End Mill, Ball 0.031 (0.79mm)
                                  TL1011
                                  TL1011

                                  117-722-TL1011 Bantam Tools
                                  :
                                  : -
                                  : -
                                  1 : -
                                  Bantam Tools TL1002-10
                                  Mfr.
                                  TL1002-10
                                  Twicea
                                  117-722-TL1002-10                                   		Bantam Tools
                                  END MILL FLAT 1/8" 10PK
                                    Min.:1
                                    Mult.:1
                                    		 2 Weeks - Active Not Applicable End Mill, Flat -
                                    TL1002-10
                                    TL1002-10

                                    117-722-TL1002-10 Bantam Tools
                                    :
                                    : -
                                    : -
                                    1 : -
                                    Bantam Tools TL1007-10
                                    Mfr.
                                    TL1007-10
                                    Twicea
                                    117-722-TL1007-10                                     		Bantam Tools
                                    END MILL 0.005" 10PK
                                      Min.:1
                                      Mult.:1
                                      		 2 Weeks - Active Not Applicable End Mill, Engraving -
                                      TL1007-10
                                      TL1007-10

                                      117-722-TL1007-10 Bantam Tools
                                      :
                                      : -
                                      : -
                                      1 : -
                                      Bantam Tools TL1000
                                      Mfr.
                                      TL1000
                                      Twicea
                                      117-722-TL1000                                       		Bantam Tools
                                      END MILL CARBIDE 0.125"
                                        Min.:1
                                        Mult.:1
                                        		 2 Weeks Carbide Active Not Applicable End Mill, Ball 0.125 (3.18mm)
                                        TL1000
                                        TL1000

                                        117-722-TL1000 Bantam Tools
                                        :
                                        : -
                                        : -
                                        1 : -
                                        Bantam Tools TL1008
                                        Mfr.
                                        TL1008
                                        Twicea
                                        117-722-TL1008                                         		Bantam Tools
                                        END MILL CARBIDE 0.005"
                                          Min.:1
                                          Mult.:1
                                          		 2 Weeks Carbide Active Not Applicable End Mill, Engraving 0.005 (0.13mm)
                                          TL1008
                                          TL1008

                                          117-722-TL1008 Bantam Tools
                                          :
                                          : -
                                          : -
                                          1 : -

                                          Prototyping, Fabrication Products

                                          Drill Bits, End Mills definition: Drill Bits, End Mills Product Listing: BN1010,TL1017-10,BN1004,TL1008-10,TL1017.Prototyping, Fabrication Products type:Adapter, Breakout Boards(1574),3D Printing Filaments(1444),Jumper Wire(998),Prototype Boards Perforated(992),Accessories(541) .Drill Bits, End Mills has 28 pieces of spot stock price information, you can click the "RFQ" button to confirm the inventory and price with the Twicea.